Related Searches: 500kW Gas Power Genset | 500kW Gas Power Generator Set | 500kW Natural Gas Power Genset | 500kW Natural Gas Power Generator Set
Product List

500kW-II Lantoky® Machine Genset

Recommended Operation Conditions

1. CH4 Content of Gas ≥76%
2. Gas Pressure ≥3 kPa
3. Calorific Value ≥ 32 MJ/m³
4. H2S Content of Gas ≤ 20 mg/m³
5. Total Sulphur Content of Gas ≤ 460 mg/m³
6. Altitude ≤ 4,000 m
7. -25℃ ≤ Ambient Temperature ≤ +50℃

Advantages & Features

1. This 500kW natural gas genset is equipped with Reliable MTU engine, Mecc Altea alternator and DEIF controller
2. This commercial generator set enjoys advanced lean-burn technology
3. Prompt dynamic response similar to diesel genset
4. Excellent power generation efficiency
5. This industrial generator set is adaptable for a wide range of gas pressure
6. Humanized manual, semi-auto and full-auto operation mode

Specification & Configuration

500kW Natural Gas Genset

Model AMC500GFJ4-PN
Prime Power 500 kW (625 kVA)
Rated Voltage 230/400 V
Rated Current 902.1 A
Rated Frequency 50 or 60 Hz
Power Factor 0.8
Gas Consumption 0.27 Nm³/kWh
Weight 9,500 kgs
Overall Size (L × W × H) 6,058 × 2,438 × 2,591 mm

Engine

Brand MTU
Model 8V165
Type 8-cylinder, 4-stroke, turbocharged
Displacement 31.65 L
Compression Ratio 11
Ignition Electric control, independent ignition
Fuel Control Lean-burn, closed-loop control
Speed Control Electric control
Rated Speed 1500 rpm
Conversion Efficiency 41%

Alternator

Brand Mecc Altea
Model ECO40-1.5L/4
Type of Excitation System Brushless with AVR
Connection Type 3-Phase, 4-Line
Conversion Efficiency 94.2%

Controller

Brand DEIF
Model AGC222
Type Manual control, semi-auto control or full-auto control

Others

Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included.
Soundproof equipment, engine oil, coolant and output cable are not included.

All specifications are subject to change without prior notice.


Related Products